XL Combined-type conveyer belt edge patching machines are belt vulcanization restoration equipment for small work-load in short time, able to directly carry out field patching towards the defects of transportation belt long-distance damage, vertical split, edge rubber falling out and cover rubber damage because of running deviation or conveyer's quality problem during the operational process.
(1) Fill unvulcanized rubber to patch up the breakage (refer to the rubber filling part of belt joint vulcanization technology, or our service staffs demonstrate when debugging equipment).
(2) Put the lower plate, hydraulic pressure plate and lower heating plate under the belt breakage according to structural diagram.
(3) Cover the breakage with upper plate, insulating plate and upper plate, aligned to lower plate.
(4) Install lock shell equidistantly, and tighten bolts.
(5) Use power-side wire to connect power and electric cabinet, and use delivery-side wire to respectively connect upper heating plate and electric cabinet, lower heating plate and electric cabinet. Do ensure respectively correspond to electric cabinet signs.
(6) Use high-pressure hose to connect water pump and hydraulic pressure plate, and open electric cabinet. (For more details, please refer to ATX Electric Cabinet Operating Procedure), and inject water into high-pressure water pocket to reach vulcanization pressure.