YXL series hydraulic pressure dotted belt vulcanization patching machines adopt electrical heating belt vulcanization patching equipment. During the operational process of belt conveyers, the belt surface with damaged holes, caused by material weight, gap and equipment failure, makes sandwich layer exposed to the air and material leak out. It's feasible to carry out vulcanization patching towards belt surface when the transporter stops. The machine consists of machine frame, heating plate, integrating hydraulic pressure hoisting jack and electric cabinet etc. The machine frame is welded with high-strength aluminum alloy; heating plate and pressurizing plate are made of aluminum alloy. The machine is of small size, light weight, self-propelled device, easy transport and safety & reliability, mainly applicable to patch belt dotted damages less than the size 300 * 300. The main dimensions include: YXL-200x200, YXL-YXL-250x250, 300x300, YXL-350x350.
1. Transport patching machine parts to the site for repairing.
2. Fill the breakage with rubber (Refer to belt joint vulcanization technology's rubber filling part, or our service staff demonstrate when debugging equipment).
3. Put machine frame under leather belt towards the damaged part.
4. Put the lower heating plate under belt damaged part, and then put the upper machine frame.
5. Press hydraulic pressure lever until enough pressure.
6. Use power-side wire to connect power and electric cabinet, and use delivery-side wire to respectively connect the upper heating plate and electric cabinet, lower heating plate and electric cabinet. Use thermometric part to respectively connect upper heating plate and electric cabinet, lower heating plate and electric cabinet. When connecting wire, do ensure it corresponds to electric cabinet's signs.
7. Open electric cabinet for vulcanization patching.